Grandstream GXV3140 User Manual Manual de usuario descargar pdf (Pagina 43)

FIRMWARE VERSION 1.0.7.80 GXV3140 USER MANUAL Page 43 of 151

The following are supported: WEP/Shared, WEP/OPEN, WPA PSK TKIP,

WPA PSK AES, WPA2 PSK TKIP, WPA2 PSK AES. The default setting is

set to “Disabled”.

Users will need to enter the corresponding authentication password for the

security mode.

Maintenance/Time Settings

NTP Server

This parameter defines the URL or IP address of the NTP (Network Time

Protocol) server. The GXV3140 phone may obtain the date and time from

the server.

The default setting is ntp.ipvideotalk.com.

DHCP Option 42 override

NTP server

Select Yes for the user to allow DHCP Option 42 to override the NTP server

if there is one on the LAN. The default setting is NO.

Time Zone

This parameter controls the date/time display according to the specified

time zone.

Self-Defined Time Zone

This parameter allows the users to define their own time zone.

The syntax is: std offset dst [offset], start [/time], end [/time]

Default is set to: MTZ+6MDT+5,M3.2.0,M11.1.0

MTZ+6MDT+5,

This indicates a time zone with 6 hours offset with 1 hour ahead which is

U.S central time. If it is positive (+) if the local time zone is west of the Prime

Meridian (A.K.A: International or Greenwich Meridian) and negative (-) if it

is east.

M3.2.0,M11.1.0

The 1st number indicates Month: 1,2,3.., 12 (for Jan, Feb, .., Dec)

The 2nd number indicates the nth iteration of the weekday: (1st Sunday,

3rd Tuesday…)

The 3rd number indicates weekday: 0,1,2,..,6( for Sun, Mon, Tues,..,Sat)

Therefore, this example is the DST which starts from the second Sunday of

March to the 1st Sunday of November.

Maintenance/Web & Telnet Access

Disable Telnet

The default value is No. If set to YES, the GXV3140 will not allow any telnet

access to the phone.

Access Method

This defines the access method for web access: HTTP or secure HTTPS

protocol.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 150 151

Sin comentarios

Grandstream GXV3140 User Manual Manual de usuario Pagina 43