Grandstream 2N Helios with Grandstream Configuration Guide Manual de usuario Pagina 13

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 15
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 12
Grandstream Networks, Inc. 2N Helios IP Door System & Grandstream IP Multimedia Phones
Page 13 of 15
www.grandstream.com Configuration Guide Last Update : 04/2013
4- Press Save to apply settings
Note: Repeat steps 4 & 5, in other Phonebook Entries if you need to configure other phones
specifying the extension of each in “Number 1” field.
5- Go to Advanced Settings > SIP Settings and set the following settings as shown in next figure.
Domain / Proxy address / Registrar address need to be set to the IP or FQDN of your SIP server (in our
example: 192.168.50.151)
SIP registration > Enable registration should be set to Yes
User ID/Auth ID/Password should be entered as configured on the SIP server
(in our example: 300 / 300 / password)
Keep Other settings to default (refer to above figure)
6- Press Save to apply settings.
7- You can check if the registration was successful from Information page
Vista de pagina 12
1 2 ... 8 9 10 11 12 13 14 15

Comentarios a estos manuales

Sin comentarios