Grandstream UCM6100 Asterisk Manager Interface (AMI) Guide Manual de usuario descargar pdf (Pagina 9)

UCM6100 Asterisk Manager Interface (AMI) Guide Page 8 of 14

2.3. Configure the following parameters in “AMI Settings” dialog. Users can connect AMI using TCP or

TLS. If using TLS, please set “TLS Enable” to “Yes”.

Table 2: AMI Settings Parameters

Parameter

Definition

AMI Port

Configures the port number to listen to for AMI connection. The default

setting is 7777.

TLS Enable

Enables listening for AMI connections using TLS. The default setting is

No.

TLS Port

Configures the port to listen to for TLS-based AMI connection. The default

setting is 5039.

TLS Bind Address

Configures the address to listen to for TLS-based AMI connections. The

default setting is 0.0.0.0, which mean all addresses.

TLS Private Key

Upload TLS private key for TLS-based AMI connection. The size of the

key file must be under 2 MB. After uploading, the file will be automatically

renamed to “ami_private.pem”.

TLS Cert

Upload the TLS cert for TLS-based AMI connection. It contains private key

for the client and signed certificate for the server. The size of the certificate

must be under 2MB. After uploading, the file will be automatically renamed

to “ami_certificate.pem”.

2.4. Click on “Save” and then “Apply Changes” to save the AMI settings.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Sin comentarios

Grandstream UCM6100 Asterisk Manager Interface (AMI) Guide Manual de usuario Pagina 9